LOGIQ3CHAM - Three flute exchangeable drills line designed to significantly increase productivity and reduce machining cycle time by up to 50% compared to conventional two flute drills.
ISCAR introduces a new LOGIQ3CHAM drill family which raises drilling performance levels to new heights. This family was designed by utilizing highly advanced technologies, based on ISCAR’s successful SUMOCHAM drill families.
The diameter range is .472 to 1.020” diameters, with drilling depth to diameter ratios of 1.5XD,
3XD and 5XD.
The new D3N drills can increase productivity by up to 50%, maintaining the excellent performance of the SUMOCHAM drills.
LOGIQ3CHAM applies the user-friendly drilling system for easy handling in accordance with the company motto of “No Setup Time”.
Features
H3P Drilling Heads
Available in the drilling range of .472-1.020” diameters with .004 increments
Single type geometry suitable for both ISO P and ISO K materials
H3P drilling heads are made of IC908 TiAlN PVD nano layer coating grade, for prolonged and predictable tool life
Unique wavy and honed cutting edges enable best chip form
and easy chip evacuation process
Patented concave cutting edges enable smooth penetration, excellent centering and stable drilling process
Patent pending robust and precise chisel point and gash angle to
withstand high cutting forces
15° corner chamfer increases wear resistance and strengthens the cutting corner
Dovetail clamping prevents the head from being extracted from the pocket during retraction
D3N Drilling Holder
Available in 1.5, 3 and 5 drilling depth to diameter ratios according to the list
3 variable and polished flute surfaces provide a smooth and easy chip evacuation process
Variable flute angle design provides durable tool structure to withstand high axial forces
Helical margin prevents chip adhesion between the body and the hole during machining
Internal coolant channels supply efficient cooling and lubrication during the drilling process
Tool body made from high grade of steel with superior hardness for high wear resistance
Drilling head pocket designed to withstand high machining conditions, allowing easy
and fast indexing
Enlarged flute volume for easy chip evacuation
Cylindrical shank & One parallel flat shank based on ISO 9266
Polished flute
Margin
Variable flute angle*
3 coolant nozzles aimed to the cutting edges
Optimized chip evacuation
Strengthens the tool (especially during exit with high feed)
Pocket features
Durable structure avoids plastic deformation and ensures a high number of drilling head
indexing, up to 50 replacements
Radial stoppers secure the drilling head and ensure a reliable drilling process in high feed
machining environment
Large face contact surface spreads out the pressure during the machining process
3 conical contact surfaces clamp the head inside the pocket to provide a precise
and stable drilling process
Close structure pocket is designed to increase heat resistance, which prolongs pocket
tool life in difficult conditions
Patented pocket design
Axial (pull out) Stoppers
Dovetail
Radial Stoppers
Contact Surface (axial stoppers)
Case Study
TOOL 1: LOGIQ3CHAM (3 FLUTES - EXCHANGABLE HEAD)
TOOL 2: COMPETITOR A (3 FLUTES - EXCHANGABLE HEAD)
TOOL 3: COMPETITOR B (3 FLUTES – SOLID CARBIDE DRILL)
TOOL 4: COMPETITOR C (3 FLUTES – SOLID CARBIDE DRILL)
Material: AISI 4340 24-29 HRc
Performance
Actual Diameter (inch))
Avg. Top
Diameter (inch)
Avg. Bottom
Diameter (inch)
Avg. Cone Value
(inch)
Avg. Roughness
(Ra)
Avg. Hole
Roundness (inch)
LOGIQ3CHAM
.63012
.63099
.63087
.00020
.05123
.00012
COMPETITOR A
.63012
.63119
.63103
.00016
.08217
.00012
COMPETITOR B
.62957
.64619
.64560
.00052
.08134
.00036
COMPETITOR C
.63063
.63063
.63060
.00016
.06528
.00016
Note: the indicated above values are an average of all the cutting conditions applied below.
Diameter: .630"
Material: AISI 4340 24-29HRC
*the LOGIQ3CHAM chip shapes were uniform and easy to evacuate in every cutting condition tested.
Tool Life
AISI4340
Vc=295sfm, f=.02008ipr
LOGIQ3CHAM
COMPETITOR A
COMPETITOR B
COMPETITOR C
Material: ASTM A51670 147-190HB
Actual Diameter (inch))
Avg. Top
Diameter (inch)
Avg. Bottom
Diameter (inch)
Avg. Cone Value
(inch)
Avg. Roughness
(Ra)
Avg. Hole
Roundness (inch)
LOGIQ3CHAM
.63012
.63063
.63079
.00036
.10682
.00012
COMPETITOR A
.63012
.63099
.63079
.00040
.19670
.00036
COMPETITOR B
.62957
.63249
.63272
.00150
.17166
.00044
COMPETITOR C
.63063
.63071
.63119
.00044
.18733
.00036
Note: the indicated above values are an average of all the cutting conditions applied below.
Diameter: .630"
Material: ATSM A51670 147-190HB
*the LOGIQ3CHAM chip shapes were uniform and easy to evacuate in every cutting condition tested.
Tool Life
ASTM A51670
Vc=360sfm, f= .01890ipr
LOGIQ3CHAM
COMPETITOR A
COMPETITOR B
COMPETITOR C
Material: GGG 50 170-240HB
Actual Diameter (inch))
Avg. Top
Diameter (inch)
Avg. Bottom
Diameter (inch)
Avg. Cone Value
(inch)
Avg. Roughness
(Ra)
Avg. Hole
Roundness (inch)
LOGIQ3CHAM
.63012
.63020
.63024
.00016
.04800
.00008
COMPETITOR A
.63012
.63087
.63087
.00005
.06926
.00008
COMPETITOR B
.62957
.62977
.62977
.00005
.06930
.00024
COMPETITOR C
.63063
.63087
.63083
.00044
.06378
.00016
Note: the indicated above values are an average of all the cutting conditions applied in the test.
Tool Life
GGG 50
Vc=393 sfm, f=.02757 ipr
LOGIQ3CHAM
COMPETITOR A
COMPETITOR B
COMPETITOR C
SYSTEM 3R (material: SAE 4340)
Vc=295 sfm f=.01182 ipr
Identifier
Actual Roundness
Roundness (section cut in .11812”)
.00041
Roundness (section cut in .94489”)
.00028
Roundness (section cut in 1.77166”)
.00039
Vc=295 sfm f=.02363 ipr
Identifier
Actual Roundness
Roundness (section cut in .11812”)
.00078
Roundness (section cut in .94489”)
.00098
Roundness (section cut in 1.77166”)
.00056
Designations
Tool
Pocket size
Effective flute length
Shank size
L/D ratio
Head
Head size
General Recommendations:
Dry drilling should not be performed under any circumstances
Semi-synthetic or emulsion lubricants are recommended to be used for extended tool life
It is essential to use internal coolant in all LOGIQ3CHAM applications
In cases of low coolant pressure or when used in a stationary application, adding an external
coolant can improve tool life
When only external coolant can be applied, it is recommended to drill to a maximum
depth of 2xD
An optional plug with internal thread for coolant connection can be used on stationary machines.
It can be pressed into the back-end hole of the drill
Shank Diameter
Plug
Internal Thread
.472
DL-12
G 1/16
.630
DL-16
G 1/16
.750
DL-20
G 1/8
1.000
DL-25
G 1/8
Following are the recommended ranges for coolant flow rate and pressure
for each drill diameter
Drill Diameter (inch)
For optimal performance, it is recommended to adjust runout of outer points and chisel with a
maximum of .00079” exceeded runout will have influence on drill performance, tool life and
hole quality.
LOGIQ3CHAM drills can be used either on milling centers or lathe machines
LOGIQ3CHAM drills can be used on sloped surfaces up to 12°. When drilling sloped surfaces of
up to 12°, reduce feed rate by 30-50% during penetration up to 5 mm depth; or use a spot
or pre-hole drill to avoid drill deviation or poor drill performance
Interrupted cut has a direct influence on hole accuracy, quality and tool life
PreHole Adjustment
Dedicated LOGIQ3CHAM drill head key
D3N A-1.5D
Exchangeable Head 3 Flute Drills with Coolant Holes and One Flat Shank, Drilling Depth 1.5xD
(1) Cutting diameter minimum
• Do not mount smaller drilling heads other than the specified range of the drill body
(2) Cutting diameter maximum
(3) Seat size code
D3N R-1.5D
Exchangeable Head 3 Flute Drills with Coolant Holes and Round Shank, Drilling Depth 1.5xD
(1) Cutting diameter minimum
• Do not mount smaller drilling heads other than the specified range of the drill body
(2) Cutting diameter maximum
(3) Seat size code
D3N A-3D
Exchangeable Head 3 Flute Drills with Coolant Holes and One Flat Shank, Drilling Depth 3xD
(1) Cutting diameter minimum
• Do not mount smaller drilling heads other than the specified range of the drill body
(2) Cutting diameter maximum
(3) Seat size code
D3N R-3D
Exchangeable Head 3 Flute Drills with Coolant Holes and Round Shank, Drilling Depth 3xD
(1) Cutting diameter minimum
• Do not mount smaller drilling heads other than the specified range of the drill body
(2) Cutting diameter maximum
(3) Seat size code
D3N A-5D
Exchangeable Head 3 Flute Drills with Coolant Holes and One Flat Shank, Drilling Depth 5xD
(1) Cutting diameter minimum
• Do not mount smaller drilling heads other than the specified range of the drill body
(2) Cutting diameter maximum
(3) Seat size code
D3N R-5D
Exchangeable Head 3 Flute Drills with Coolant Holes and Round Shank, Drilling Depth 5xD
(1) Cutting diameter minimum
• Do not mount smaller drilling heads other than the specified range of the drill body
(2) Cutting diameter maximum
(3) Seat size code
H3P
Exchangeable 3 Flute Drilling Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)